Jums taip pat gali patikti…
Fotoaparatų priedai
Specifikacija
The Tilta Nucleus-M Wireless Lens Control System Kit contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.
This kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000′ away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck.
Tilta Nucleus-M FIZ Hand Unit Specs
Operating Frequency | 2.4 GHz |
Maximum Transmission Distance | 150 to 300 m |
Transmission Channels | 15 |
Emission Power | 30 to 100 MW |
Current | 0.15 A |
Voltage | 7.2 7.2-14.8 V, external |
Battery Type | 18650 |
Operating Temperature Range | -20 to 50°C |
Material of Construction | Aluminum alloy, stainless steel, ABS plastic Rubber, rosewood |
Dimensions | 142.0 x 90.5 x 70 mm |
Weight | 430 g |
Tilta Nucleus-M FIZ Lens Control Motor Specs
Gear Mod | 0.8 |
Gear Pitch | 32 |
Number of Gear Teeth | 35 |
Face Width | 10 mm |
Operating Frequency | 2.4 GHz |
Maximum Range | 1640′ / 500 m (unobstructed) |
Emission Power | 30-100 MW |
Current | Quiescent: 0.10 A, 14.8 V Conventional: 0.5 A, 14.8 V |
Voltage | 7.2-24 V |
Rod Compatibility | 19, 15 mm |
Noise | 15 dB |
Operating Temperature Range | -20 to 50°C |
Material of Construction | Aluminum alloy, stainless steel, ABS plastic |
Dimensions | 11.43 x 8.26 x 3.49 cm |
Weight | 190 g (motor only) 225 g (with 15mm rod adapter) 221 g (with 19mm rod adapter) |
Material of Construction | Silicone and plastic |
Compatibility | Tilta Nucleus-M, Nucleus-Nano Most DSLR lenses |
Tilta Nucleus-M D-Tap To 7-Pin Motor Power Cable Specs
Connectors | D-Tap, 7-pin LEMO-type |
Length | 58.4 cm |
Weight | 32 g |
Tilta Nucleus-M 7-Pin Motor-To-Motor Connection Cable (21.65″) Specs
Material of Construction | Aluminum Alloy, Copper, Rubber |
Connectors | 7-Pin |
Length | 55.0 cm |
Tilta Nucleus-M Follow Focus Marking Disk Specs
Material of Construction | ABS plastic |
Tilta Nucleus-M Battery Charger Specs
Power Input | 100-240 VAC, 50/60 Hz, 0.15 A 5 VDC, 2 A |
Power Output | 4.2 VDC, 650 mAh |
Material of Construction | Plastic |